info

Monday, December 19, 2016

Thermapen Mk4 review





Let me start by saying Thermapen has not paid us a dime for this review, in fact we ordered it on their website and paid full retail. Also, the link we use to recommend purchase is a link to ThermoWorks directly and we get nothing for the link. So basically, ThermoWorks, if you are out there, You're welcome, thanks for nothing.  Ultimately, I don't really care, we are about finding the best and this thermometer is it. So let's pass it along.

So no drinks for this review. There is no celebration and there is no food.


Review:


We came across the thermapen while watching competition BBQ shows on TV and realized that everyone was using the same device. I'm guessing product placement and if so, I tip my hat.

We have had issues with thermometers as you can read about on our turkey breast post. It only takes ruining one or two expensive and time consuming cooks to realize how important an accurate temperature measurement is.

The bottom line is don't skimp on your tools. You spent the money on the BGE for a reason so do the same for your thermometer. You won't regret it.

We purchased the Mk4 on ThermoWorks' web site. While they used to sell on Amazon, they don't seem to do that anymore.

Note however that there are a ton of look alike knockoff Chinese versions of this thing. Not that Chinese is necessarily bad but in this case. Go for the original.



The Thermapen arrived in a few days.


Included in the box: A bag of Jelly Bellys, a great manual, cooking guide and calibration certificate.


This is what you pay for. It is very accurate and very fast.

Also, insightful advice on how to measure temperatures and the art of carry over cooking. You figure and be that as it may.


The Thermapen is heavy and solid feeling. It opens like a knife and turns on automatically when you open it. Also the display automatically lights up in the dark and it auto rotates depending on how you are holding it. The temperature is measured at the very tip and only the very tip. 

It is helpful to slide it in and notice the difference between the surface temperature and the coldest part of the meat. It explains how critical it is to take the meat off before the coldest part reaches ideal temperature. The hotter part or exterior most part of the meat's temperature will continue to migrate to the center long after you take it off. It is the carryover cook.

The best part is that it reads temperatures incredibly accurately and it does it in 2-3 seconds. 



Verdict:

At about $90 it seems expensive for a meat thermometer but we think it is worth it. The first time you spend 3 hours cooking a turkey and it turns out overcooked, you've paid for it. So go get one, you won't regret it.

Also, a nice benefit is the mailing list. While you get an ad for more devices, it also comes with a recipe and recommended cook temperatures for all sorts of stuff. Like bread, cake, and cookies. Things I hadn't considered cooking to temperature before.







We would love it if you would drop us a note in the comment section and let us know how your cook went. We are always looking for suggestions and improvements! We have opened up the comments so that anyone can post now, so please do. I'll try not to delete anything unless it is spam or stabs me in the heart.



Please help support our site, buy something you like on Amazon. Simply click through the links below and though you can pick anything, I suggest the thermometer and knives below:

So apparently Thermoworks doesn't sell through Amazon anymore. You must buy direct. Still the thermometer to have. Go here and order direct. unfortunately, we don't get a dime for this but still, it is one you want.

Aaron Franklin's Favorite trimming knife:

Dexter-Russell (S131F-6PCP) - 6" Boning Knife - Sani-Safe Series

Aaron Franklin's Favorite Brisket cutting/serving knife:

Sani-Safe S140-12SC-PCP 12" Scalloped Roast Slicer




Wednesday, December 14, 2016

Macaroni and Cheese - Community Q style - UPDATED 2.0







So, in our continuing search for the perfect macaroni and cheese, we have attempted to reach the holy grail of mac and cheese in Atlanta, and that is Community Q. Some argue that Community Q is a Mac and Cheese restaurant disguised as a BBQ joint. It is by far the best we have had, and on holidays we regularly go pick some up to go for a side. However, this Thanksgiving we were faced with a sold-out situaish. So, let's make it ourselves. SEE RED FOR UPDATES.



Research:

Located the recipe from one of the owners back when they worked elsewhere. It is HERE.

Ingredients:



16 oz Rigatoni noodles
UPDATED TO 2.25 CUPS
8 oz Monterey Jack cheese
8 oz Cheddar cheese
4 oz Parmesan cheese

Don't get too fancy with the ingredients here. It is mac and cheese, so use staple store brands.


Execution:

Boil some water


Salt the water - as salty as the sea  and then some (extra salty) - and add noodles. Follow the box.


In the meantime, grate up some cheese. All the cheddar and the Jack and then a cup of the Parmesan.



Drain the noodles but don't rinse
.


Mix in all the cream and half the cheese and stir





Then place in a shallow pan - UPDATED TO A DEEPER PAN


Sprinkle on some extra parmesan and the remaining cheese 


Bake at 350 for 30 minutes



Enjoy!


Verdict:

It was a little dry. I think that the recipe was fine, but we used a pan that was too big and spread the mac and cheese too thin with too much surface area - it isn't how they make it in the store. Next time, we will use a smaller and deeper pan and keep the mac and cheese a little thicker with less surface area. Otherwise, the taste was perfect. We will do this again without modifying the recipe.

Standby we will update this.

UPDATED TO DEEPER PAN AND LITTLE MORE CREAM. THIS WAS PERFECT!! ALSO NEEDS TO REST FOR 20 MINUTES OR SO.







We would love it if you would drop us a note in the comment section and let us know how your cook went. We are always looking for suggestions and improvements! We have opened up the comments so that anyone can post now, so please do. I'll try not to delete anything unless it is spam or stabs me in the heart.



Please help support our site, buy something you like on Amazon. Simply click through the links below and though you can pick anything, I suggest the thermometer and knives below:

So apparently Thermoworks doesn't sell through Amazon anymore. You must buy direct. Still the thermometer to have. Go here and order direct. unfortunately, we don't get a dime for this but still, it is one you want.

Aaron Franklin's Favorite trimming knife:

Dexter-Russell (S131F-6PCP) - 6" Boning Knife - Sani-Safe Series

Aaron Franklin's Favorite Brisket cutting/serving knife:

Sani-Safe S140-12SC-PCP 12" Scalloped Roast Slicer




Search